3 Series E93 330i (N53) CONVER
Backrest mounting on door side:
1.
Install door-side backrest link (1).
2.
Backrest link (1) must be joined centrally on blocking
cam (2).
3.
Connect stud and tighten nut hand-tight.
Backrest mounting on tunnel side:
1.
Install tunnel-side backrest strut.
Important!
Plastic bushing must not be damaged
2.
Tighten screw hand-tight.
Note:
Tighten down stud and screw only after mounting backrest on
both sides.
Tightening torque:
•
Stud on door side: 52 10 08AZ
.
•
Screw on tunnel side: 52 10 07AZ
.
Replacement only:
Remove inertia reel unit.
Remove lumbar cushion and valve housing/drive unit on front
seat.
RA Removing and installing/replacing backrest frame on left or right front seat
BMW AG - TIS
10.02.2013 23:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -