3 Series E93 330i (N53) CONVER
54 37 ...
Gauging rear module
Special tools required:
•
00 9 450
•
54 0 150
•
54 0 151
•
54 0 152
•
54 0 180
Important!
The rear module brackets are gauged and the screw
connection sealed at the factory.
Gauging of the brackets is only to be carried out after a repair
to the body.
It is necessary in the warranty period to consult the country-
specific hotline before opening the screw connection seal.
Always install and remove rear module gauge with 2 helpers.
To prevent damaging the rear module gauge, set the gauge
down only in the transportation crate or on brackets.
The rear module gauge is a highly sensitive measuring
instrument which reacts even to light impact with distortion.
The rear module gauge must be checked for dimensional
accuracy on a master gauge after being subjected to impact
or dropped.
Necessary preliminary tasks:
•
Gauge roof module bracket
RA Gauging rear module
BMW AG - TIS
11.02.2013 00:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
