3 Series E93 330i (N53) CONVER
Overview of butylene flat tape application on front roof shell
corner, left/right:
1.
Apply butylene flat tape approx. 3 cm in length to roof shell
corner on each side.
Overview of butylene thread laying on front roof shell, front
left/right:
1.
Butylene flat tap on roof shell corner.
2.
Apply 7 mm dia. butylene thread from middle of threaded
bush rising slightly up to seal carrier.
Installation:
Connect and smooth butylene thread joints with plastic wedge.
Overview of butylene thread laying on front roof shell, front
left/right:
1.
Butylene flat tap on roof shell corner.
2.
Allow 7 mm dia. butylene thread to run out from middle of
threaded bush rising slightly up to seal carrier.
Installation:
A second person will be need to help install the seal.
Position seal at front corner on left and right of roof shell.
Align seal with screw fastening point (1) to thread in roof shell.
Press seal down in front area.
RA Replacing front roof shell seal
BMW AG - TIS
11.02.2013 00:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
