bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

22 RA Removing And Installing_replacing Trim Strip For Roof Shell, Middle Left Or Righ|Page 2142 > < 21 RA Removing And Installing_replacing Roofliner For Roof Shell At Rear|Page 2140
Page 1
background image

54 37 060

Removing and installing/replacing trim strip
for roof shell, middle left or right

Move convertible top into service position.

Move convertible top so that angle of hinges is not 

90

°

Important!

Risk of damage! Pressure in hydraulic system drops and
convertible top loses its position.

Support rear roof shell to convertible top cover with suitable
auxiliary material.

Auxiliary material must lie over wide area and if possible over
entire length.

Rear roof shell is supported by auxiliary material on convertible top
cover.

Roof shells block each other. 

Lever out covers of clips (1).

Release and remove clips (1).

RA  Removing and installing/replacing trim strip for roof shell, middle left or righ

BMW AG - TIS

11.02.2013  00:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

22 RA Removing And Installing_replacing Trim Strip For Roof Shell, Middle Left Or Righ|Page 2142 > < 21 RA Removing And Installing_replacing Roofliner For Roof Shell At Rear|Page 2140