bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Fluid Reservoir For Windscreen Washer System|Page 2467 > < 2 RA Removing And Installing_replacing A Spray Nozzle In Windscreen Washer System|Page 2465
Page 1
background image

61 71 061

Replacing fluid reservoir for windscreen
washer system

Necessary preliminary tasks:

Partially remove front right wheel arch trim

If necessary, remove right front wheel

E92 without M3, E93:

Remove front right auxiliary direction indicator

Note:

Catch any escaping washer fluid if necessary.

 

Release cable ties (1) on fluid reservoir.

Feed high-pressure line (2) out of holders.

Unlock filler hose (4) and detach from fitting on fluid
reservoir (5).

Release screw (3).

Pull fluid reservoir towards front.

Installation:

Retaining lugs (1) of fluid reservoir must be correctly seated in
tabs (2).

Disconnect all plug connections.

Release cable ties on fluid reservoir.

Remove level switch (1) .

Remove windscreen washer pump (2) .

If necessary, remove washer pump for headlight washer
system (3) .

Remove washer reservoir.

RA  Replacing fluid reservoir for windscreen washer system

BMW AG - TIS

11.02.2013  01:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Fluid Reservoir For Windscreen Washer System|Page 2467 > < 2 RA Removing And Installing_replacing A Spray Nozzle In Windscreen Washer System|Page 2465