3 Series E93 335i (N54) CONVER
Insert the drive unit in the casing (1).
Seal the casing (1) with cable tie (2).
Note:
Make sure that the cable from
the drive unit is fixed in the
casing (1) and cannot be
pulled out.
Push the lumbar support (1) from the
bottom up onto the lumbar support
piping.
The tabs (1) on the left and right must
be behind the transverse spring (2).
Place the tabs (1) on the lumbar
support around the transverse
spring (2) and fix them in place with
the clips (3).
SI Lumbar support inoperable E93
BMW AG - TIS
11.02.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -