3 Series E93 335i (N54) CONVER
Unfasten screws (2).
Tightening torque: 11 41 3AZ
.
Release screws (1).
Tightening torque: 11 41 2AZ
.
Installation:
Replace aluminium screws.
Detach sprocket wheel (1) in direction of arrow.
Note:
Timing chain (3) of triangular drive is pressed upwards by chain
tensioner.
Do not remove sprocket wheel.
Remove oil pump (2) in direction of arrow.
Installation:
Check spacer bushings (1) for secure seating and damage;
replace if necessary.
Align twin surface (3) on oil pump (2) to sprocket wheel.
Install oil pump (2).
RA Removing and installing oil pump (N54)
BMW AG - TIS
12.02.2013 01:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -