3 Series E93 335i (N54) CONVER
Fit central bolt (1).
Install special tools 11 8 650 and 11 0 290.
Tighten the screw (1).
Tightening torque: 11 66 2AZ
.
Install special tool 11 0 300 .
Tighten the screw (2).
Tightening torque: 11 41 4AZ
.
Tighten down special tool 11 5 200 with screws (1) to hub.
Do not remove special tools 11 0 300 and 11 4 280 .
RA Removing and installing/replacing chain module for oil pump/vacuum pump (N54)
BMW AG - TIS
12.02.2013 01:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -