3 Series E93 335i (N54) CONVER
11 66 000
Removing and installing/replacing vacuum
pump (N54)
Special tools required:
•
11 0 290
•
11 4 120
•
11 8 650
Necessary preliminary tasks:
•
Remove drive belt.
•
Remove tensioner for drive belt.
•
Remove sealing cover for vacuum pump.
•
Remove intake air manifold.
•
Remove H.P. pump.
Rotate crankshaft at central bolt.
Turn sprocket wheel until drilled holes and screws of vacuum
pump match up.
Screw in special tool 11 8 650 .
Secure special tool 11 0 290 in sprocket wheel and to special
tool 11 8 650 .
Release screw (1).
Tightening torque: 11 66 2AZ
.
Press chain tensioner (1) with chain in direction of arrow.
Insert special tool 11 4 120 .
Remove sprocket wheel (2) in direction of arrow.
RA Removing and installing/replacing vacuum pump (N54)
BMW AG - TIS
12.02.2013 01:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -