3 Series E93 335i (N54) CONVER
Unlock seal (1) in direction of arrow and remove.
Release screw.
Remove A/C condenser towards rear top from fixtures.
Carefully tilt condenser (1) in direction of engine, taking care not
to damage the condenser or lines in the process.
Note:
Lines of A/C system remain connected to condenser.
Pull cooling loop (2) of power steering out of module carrier and
remove.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
12.02.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -