3 Series E93 335i (N54) CONVER
Expose suction line up to connection on vane pump.
Release banjo bolt (1) and disconnect pressure line (2).
Installation:
Replace all sealing rings.
Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 8AZ
.
Release hose clamp (4) and detach suction line (5) from vane
pump.
Installation:
Markings (3) on suction line and vane pump connection must
match up.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing suction line for power steering (N54)
BMW AG - TIS
12.02.2013 05:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -