3 Series E93 335i (N54) CONVER
Open weld joints in areas (1).
Take off holder (2).
Mark severance cut in accordance with measurement a and cut.
Measurement a=40 mm behind support, frame side
member (1).
Installation:
Weld in reinforcement plates at severance cuts.
Mark severance cut (1) and cut.
Open weld joints in areas (2).
Installation:
Weld new components in areas (3) additionally.
Mark severance cut (1) in accordance with measurement a and
cut rear axle carrier.
Important!
Cut outer metal sheet only.
Measurement a=70 mm from rear axle bushing mounting.
Open weld joints in area (2).
Installation:
Weld in reinforcement plates at severance cuts.
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
12.02.2013 08:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
