3 Series E93 335i (N54) CONVER
Important!
Cut outer plate only for following severance cuts.
Mark severance cut at top in accordance with specified measurement and cut.
Measurement a = approx. 175 mm from edge of cowl panel.
Severance cut (1) at bottom through 20 mm dia. bore hole.
Open weld joints in areas (2).
Installation:
Weld in reinforcing panels at all severance cuts.
Open weld joint in area (1).
Installation:
Mark new part in accordance with severance cuts above and cut.
RA Replacing front left outer door pillar section
BMW AG - TIS
12.02.2013 08:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -