3 Series E93 335i (N54) CONVER
Release screws (1) on bumper trim (2).
Important!
Do not damage bumper trim when pulling off.
Detach bumper trim (1) at sides.
Pull bumper trim (1) forwards slightly and if necessary disconnect
plug connections on ultrasonic sensors and/or fog lights.
Remove bumper trim (1) towards front with aid of a 2nd person.
Installation:
Height adjustment, refer to Gap dimensions, body.
RA Removing and installing front bumper trim
BMW AG - TIS
12.02.2013 08:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -