3 Series E93 335i (N54) CONVER
51 16 204
Removing and installing/replacing rear cup
holder
Open cup holder (1) and remove mat insert (2).
Lever out hinges (1).
Close lid (2) slightly and feed out completely with both hinges (1)
in direction of arrow.
Repeat procedure on lid (3).
Reach through openings and release catches (1).
Remove housing (2).
Installation:
Catches (1) on housing (2) must not be damaged.
RA Removing and installing/replacing rear cup holder
BMW AG - TIS
12.02.2013 09:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
