3 Series E93 335i (N54) CONVER
Adjusting pretension:
Note:
Note positioning aid on special tool.
Slacken nut (3) with reversing ratchet (2) of special tool
51 3 300 (consisting of 51 3 301 and 51 3 302 ).
Turn the knob (1) on the special tool 51 3 300 to turn the
stud (4) and thereby alter the pretension.
Tighten nut (3).
Tightening torque 51 33 1AZ
.
Check adjustment, repeat procedure if necessary.
Note:
After completing adjustment work, it is essential to initialise the
power window unit.
Checking run-in of door window glass:
Door window glass must strike the inside of the seal.
Check adjustment of rear side window, adjusting if necessary.
RA Adjusting left or right front door window glass
BMW AG - TIS
12.02.2013 10:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -