3 Series E93 335i (N54) CONVER
51 71 120
Removing and installing/replacing cowl panel
seal
Necessary preliminary tasks:
•
Remove moulding on rain gutter on left/right
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Pull back tab (1) and release screw (2) underneath.
Installation:
Water drainage channel (3) must not be clogged.
Detach seal (1) in direction of arrow from window frame.
Installation:
If necessary, moisten seal (1) with water for better fitting.
RA Removing and installing/replacing cowl panel seal
BMW AG - TIS
12.02.2013 11:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
