3 Series E93 335i (N54) CONVER
Unclip battery positive lead (1).
Unclip wiring harness (2).
Release nut (3) and disconnect ground cable.
Tightening torque 51 71 16AZ
.
Release screw and remove mounting (4).
Release nuts along line.
Tightening torque 51 71 9AZ
.
Remove video module (1) and carefully place to one side.
Remove hydraulic control unit (2), carefully place to one side and
secure.
Unlock and disconnect holder (3).
Cut open cable tie (4).
Remove multifunction pan.
Installation:
Seals (1) on multifunction pan (2) must be replaced each time
they are removed.
RA Removing and installing/replacing multifunction pan (N54)
BMW AG - TIS
12.02.2013 11:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
