3 Series E93 335i (N54) CONVER
52 14 ...
Removing and installing or replacing trim for
release handle on front left or right seat
Necessary preliminary tasks:
•
Remove rear panel
•
Disconnect battery negative lead
Important!
Screw (1) must not fall between airbag module and backrest
frame.
If necessary, remove airbag module.
No sharp-edged objects permitted in area of side airbag.
Release screw (1).
Unclip side trim cover from backrest.
Installation:
Place seat belt between seat belt guide and trim cover.
Make sure the trim cover is fitted correctly in the guide.
Unfasten plug connection (1) and disconnect.
Replacement only:
Unclip toggle switch.
RA Removing and installing or replacing trim for release handle on front left or ri
BMW AG - TIS
12.02.2013 11:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
