3 Series E93 335i (N54) CONVER
54 37 232
Removing and installing support block
Move roof module into following intermediate station.
Note:
Illustration shows removal of left side.
The right side is removed in the same way as the left side.
Lever out expansion rivets (1).
Remove trim (2) for support block.
Unscrew nuts (1).
Remove support block.
Note:
Observe following work steps for installing support block:
RA Removing and installing support block
BMW AG - TIS
12.02.2013 12:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -