3 Series E93 335i (N54) CONVER
Note:
Adjustment work should be carried out by one person only.
Carry out following tasks only with special tool 54 0 180 in conjunction with 00 9 450 .
Tighten down barrel screws to 0.05 Nm (=5 cNm).
Observe tightening sequence:
1.
Barrel screw, rear left
2.
Barrel screw, rear right
3.
Barrel screw, front left
4.
Barrel screw, front right
Screw down bracket with shims.
Tightening torque: 54 37 03AZ
.
Release screw connection (1) for gauge on bracket.
Release screw connection for roof module bracket gauge on basic
gauge.
Remove bracket gauge for roof module.
RA Gauging roof module brackets
BMW AG - TIS
12.02.2013 12:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
