3 Series E93 335i (N54) CONVER
Adjusting pretension on fastener:
Note:
Mark position of screw.
Slacken screw (1) (do not unscrew fully).
Turn locking element upwards through 0.5 mm.
Tighten screw (1).
Tightening torque: 54 37 11AZ
.
Check gap dimensions of roof shell and trim strip.
RA Removing and installing/replacing rear roof shell fastener
BMW AG - TIS
12.02.2013 12:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
