3 Series E93 335i (N54) CONVER
Installation:
Press seal with trim strip (1) firmly onto roof shell.
Align screw fastening point to thread in roof shell.
Installation:
Press seal onto butyl bead
Pop in seal in marked area (1).
Installation:
For optimum securing of seal (2), press down entire upper area
with special tool 51 0 300 .
If necessary, use plastic hammer and impact protection.
Carry out leak test.
RA Replacing rear roof shell seal
BMW AG - TIS
12.02.2013 12:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -