bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

20 RA Removing And Installing Or Replacing Roofliner For Roof Shell In Middle|Page 2163 > < 19 RA Removing And Installing_replacing Roofliner For Roof Shell At Front|Page 2161
Page 1
background image

54 37 040

Removing and installing or replacing roofliner
for roof shell in middle

Special tools required:

00 4 430

51 0 310

54 0 230

Installation:

Microencapsulated screws (Loctite) must be replaced and

may not be reused

Screw connection must be completed within 20 min. (start of

curing)

Microencapsulated screws must not be retightened

Thread of nut must be cleaned beforehand in event of

repeated use

Move convertible top into service position.

Move convertible top so that angle of hinges is not 

90

°

Important!

Risk of damage! Pressure in hydraulic system drops and
convertible top loses its position.

Support rear roof shell to convertible top cover with suitable
auxiliary material.

Auxiliary material must lie over wide area and over entire length.

Rear roof shell is supported by auxiliary material on convertible top
cover.

Roof shells block each other. 

RA  Removing and installing or replacing roofliner for roof shell in middle

BMW AG - TIS

12.02.2013  12:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

20 RA Removing And Installing Or Replacing Roofliner For Roof Shell In Middle|Page 2163 > < 19 RA Removing And Installing_replacing Roofliner For Roof Shell At Front|Page 2161