3 Series E93 335i (N54) CONVER
Release Torx screws (1) for C-pillar flap.
Tightening torque: 54 37 21AZ.
Unclip roof liner at front with special tool 51 0 310 .
Installation:
If necessary, replace faulty clips.
Unclip roof liner at rear with special tool 51 0 310 .
Installation:
If necessary, replace faulty clips.
Pull tensioning strap completely out of automatic reel.
Tie a safety knot into tensioning strap to prevent the tensioning
strap from coiling up.
Important!
Release safety knot after installation.
Unscrew nuts (1).
Tightening torque: 54 37 18AZ.
Installation:
Replace compression nuts.
Remove automatic reel (2).
RA Removing and installing or replacing roofliner for roof shell in middle
BMW AG - TIS
12.02.2013 12:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
