bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 RA Removing And Installing_replacing Roofliner For Roof Shell At Rear|Page 2169 > < 20 RA Removing And Installing Or Replacing Roofliner For Roof Shell In Middle|Page 2167
Page 1
background image

54 37 045

Removing and installing/replacing roofliner
for roof shell at rear

Move convertible top into service position.

Move convertible top so that angle of hinges is not 

90

°

Important!

Risk of damage! Pressure in hydraulic system drops and
convertible top loses its position.

Support rear roof shell to convertible top cover with suitable
auxiliary material.

Auxiliary material must lie over wide area and if possible over
entire length.

Rear roof shell is supported by auxiliary material on convertible top
cover.

Roof shells block each other. 

Carefully insert retainer lifter between roofliner and roof shell.

Lever clips (1) out of roof shell with roof shell.

Installation:

If necessary, replace faulty clips.

Detach roofliner in area (1).

RA  Removing and installing/replacing roofliner for roof shell at rear

BMW AG - TIS

12.02.2013  12:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

21 RA Removing And Installing_replacing Roofliner For Roof Shell At Rear|Page 2169 > < 20 RA Removing And Installing Or Replacing Roofliner For Roof Shell In Middle|Page 2167