bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

26 RA Removing And Installing_replacing Roof Shell In Middle|Page 2182 > < 26 RA Removing And Installing_replacing Roof Shell In Middle
Page 2
background image

Mark tensioning strap at deflection point (1).

Carefully open retainer (2) without damaging the tensioning
strap.

Installation:

Replace faulty retainer.

Feed tensioning strap (1) out of holder (3) on frame.

Open holder (3) and remove water drain hose (2).

Unclip metal retainer (1) from frame.

Feed water drain hose (2) out of frame.

Note:

A second person will be needed to help with the following work
steps for removing the roof shell in the middle.

RA  Removing and installing/replacing roof shell in middle

BMW AG - TIS

12.02.2013  12:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

26 RA Removing And Installing_replacing Roof Shell In Middle|Page 2182 > < 26 RA Removing And Installing_replacing Roof Shell In Middle