3 Series E93 335i (N54) CONVER
Note:
The bolts have different lengths. Install bolts as follows:
1.
Short bolts
2.
Long bolts
Tighten down bolts on main mounts on left and right.
Assemble linkage and screw down.
Adjust rotary sleeve (1) if necessary.
Adjust the length of the linkage with rotary sleeve (1) until the
fastening point fits in the barrel screw.
Important!
Brass pin can break off.
Tightening torque for nut (2): 8 Nm.
Tighten nut (2) on left and right. The cone is secured in the barrel
screw.
Lay linkage (1) for luggage compartment partition.
RA Removing and installing roof module
BMW AG - TIS
12.02.2013 12:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
