3 Series E93 335i (N54) CONVER
Installation:
Gauge coupling fastener.
Observe screwing sequence of coupling fastener:
1.
Z-direction (coupling fastener to screwing plate, rollover
protection system)
2.
Y-direction (coupling faster to side panel)
3.
X-direction (roof frame to partition wall)
Tightening torque: 54 37 22AZ
.
Release rear nuts (1) on left and right roof module main bearings.
Tightening torque: 54 37 20AZ.
Important!
Convertible top must not be moved after the nuts on the main bearing have been released.
RA Removing and installing roof module
BMW AG - TIS
12.02.2013 12:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
