3 Series E93 335i (N54) CONVER
Check distanced between left and right brackets and left and right
main mounts:
1.
Measure distance between guide pins.
2.
Measure distance between rear threaded studs.
Check measured lengths between the main mounts.
If necessary, use rotary sleeve (1) to adjust measured distance
between the guide pins.
If necessary, use rotary sleeve (2) to adjust measured distance
between the threaded studs.
Install roof module in vehicle.
Gauge coupling fastener.
Set down removed roof module with assembly carrier from inside
of transportation crate and bolt down.
Remove assembly carrier.
RA Replacing roof module
BMW AG - TIS
12.02.2013 12:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
