3 Series E93 335i (N54) CONVER
54 37 215
Removing and installing/replacing right main
kinematics hydraulic cylinder
Necessary preliminary tasks:
•
Remove luggage compartment wheel arch trim on left or right
•
Remove panel for main bearing on left or right
•
Trunk lid opened
Caution!
Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic cylinder.
Protect components and work area with suitable materials
(e.g. cloths).
Note:
Hydraulic system must be at zero pressure.
Open screw on hydraulic unit 1.5 turns.
Unfasten plug connection (1) and disconnect.
RA Removing and installing/replacing right main kinematics hydraulic cylinder
BMW AG - TIS
12.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
