3 Series E93 335i (N54) CONVER
Tilt special tool 54 0 161 upwards.
As a result, the coupling fastener (1) snaps over the dead centre
position.
Now slide open coupling fastener (1).
Open rear-end module manually.
Clip special tool 54 0 240 on to hydraulic cylinder (1) on left and
right.
Important!
The opening in the assembly support must face towards the
rear of the vehicle.
Mask off air outlet grille with adhesive fabric tape (1).
Carefully press air outlet grille to the side.
Release screws (2) on base plate on left and right.
Installation:
Replace screws.
Right side of vehicle only:
Release screw (3) on Hall sensor.
Manually open rear lid with key.
Release screw (1) for locking part on left and right.
Installation:
Replace screws.
RA Emergency closing hardtop
BMW AG - TIS
12.02.2013 12:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -