3 Series E93 335i (N54) CONVER
Lift out cover (1) on left and right base plate.
Installation:
Cover (1) for base plate must be replaced after each removal.
Gauge, cowl panel:
Note:
Base plates must be screwed down loosely for gauging.
Base plates should still be able to be slid in order to centre themselves.
Position special tool 54 0 110 with journal in base plate on cowl panel.
RA Gauging base plate (cowl panel fastener)
BMW AG - TIS
12.02.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -