3 Series E93 335i (N54) CONVER
Necessary preliminary tasks:
•
Remove air outlet trim grille
•
Remove both panels for main bearing
•
Remove panel for luggage compartment partition
•
Remove panel for passenger compartment partition
•
Remove control unit
•
Remove inertia reel mechanism and sash guide on left and
right
Move roof shells into following intermediate position.
Lever out clips (1) on left and right trim.
Remove trim (2) on right and left.
Release screws (1).
Remove load protective plate.
RA Removing and installing/replacing rollover protection system
BMW AG - TIS
12.02.2013 12:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
