3 Series E93 335i (N54) CONVER
65 50 011
Removing and installing (replacing) video
module for on-board monitor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove luggage compartment floor panel
Note:
Follow instructions for handling optical fibres.
Release screws (1).
Disconnect plug connections (2) and remove bracket (3) with
video module.
Installation:
Ensure correct cable routing.
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
12.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -