5 Series E34 518i (M40) TOUR
11 31 110
Removing toothed belt for camshaft drive
(M40)
Remove bulkhead heater (air collector). This operation is
described in the section on removing complete wiper console,
refer to 61 61 270
Drain off and dispose of coolant.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 11 5AZ
Caution!
Left-hand threads.
Lock belt pulley in position using special tool 11 5 050.
Release union nut with special tool 11 5 040 from water pump.
Remove fan wheel and fan coupling from water pump and remove
together with fan cowl.
Removing fan cowl,
refer to 17 11 031
Installation:
Tightening Torque,
refer to Technical Data 11 52 1AZ
Note:
Tightening Torque 40 Nm when using special tool
11 5 040 is equivalent to 30 Nm on scale of a torque
wrench.
RA Removing toothed belt for camshaft drive (M40)
BMW AG - TIS
16.01.2013 23:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
