5 Series E34 525i (M50) SAL
Mounting cylinder head on assembly (M50)
Fit special tool 11 1 065 (assembly fixture) to special tool
00 1 490 (assembly frame).
Do not install special tool 11 0 180 (support board).
Note:
If assembly fixtures have already been supplied, screw on
special tool 11 1 442 (additional holder).
Mount cylinder head on assembly fixture with two cylinder-head
bolts.
RA Mounting cylinder head on assembly (M50)
BMW AG - TIS
20.01.2013 19:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
