5 Series E34 525i (M50) SAL
Removing oil pan (M50 VANOS)
Unscrew and pull out oil dipstick guide tube.
Installation:
Check sealing ring, replacing if necessary.
Unscrew all bolts and take off oil pan.
Installation:
Check seal, replacing if necessary.
Apply 3 Bond 1209 (permanently elastic sealing compound) - refer
to BMW Parts Service - at joints of timing case at front end and at
rear cover at rear end.
RA Removing oil pan (M50 VANOS)
BMW AG - TIS
20.01.2013 19:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
