5 Series E34 525i (M50) SAL
Removing valves (M50)
Fit special tool 11 1 065 (assembly fixture) to special tool
00 1 490 (assembly frame).
Note:
If assembly fixtures have already been supplied, screw on
special tool 11 1 442 (additional bracket).
Install special tool 11 1 441 (support board) in assembly fixture.
Mount cylinder head on assembly fixture with two cylinder-head
bolts.
Screw on special tool 11 1 051 (bracket).
Fit special tool 11 1 068 (pressure lever) with special tool
11 1 052 (pressure basket) and special tool 11 1 067 (guide
rod).
RA Removing valves (M50)
BMW AG - TIS
20.01.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -