5 Series E34 525i (M50) SAL
Removing vibration damper hub (M50)
Arrest flywheel with special tool 11 2 170.
Unscrew central bolt.
Take off washer and hub.
Installation:
Position hub in such a way that groove and Woodruff key are
aligned.
Collar of washer faces hub.
Central bolt tightening torque = 410 Nm.
Installation:
Press new radial sealing ring down flush with special tool
11 3 280 in conjunction with central screw with timing-chain
cover fitted.
RA Removing vibration damper hub (M50)
BMW AG - TIS
20.01.2013 19:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
