5 Series E34 525i (M50) SAL
Replacing thermostat housing cover (M50
VANOS)
If applicable, unscrew thermostat housing for other work on
cylinder head later.
Installation:
Sealing surfaces must be clean and without oil.
Check rubber profile seal,
replacing if necessary.
Installation:
Check installed direction.
Vent hoe or arrow faces up.
Replace sealing ring.
RA Replacing thermostat housing cover (M50 VANOS)
BMW AG - TIS
20.01.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -