5 Series E34 525i (M50) SAL
Adjustment specification for camshaft (M50
VANOS)
Hold crankshaft in TDC position with Special Tool 11 2 300.
Caution!
Remove special tool prior to operating engine.
Caution!
If camshaft position has to be corrected enough for there to
be valve movement in cylinders No. 1 and 6, , first rotate
crankshaft enginewise approx. 30
°
from TDC position, and do
not turn back until camshaft starts to rotate.
This prevents contact between valves and pistons.
Turn camshaft until peaks of intake and exhaust cams in cylinder
No.1 point to each other.
Unscrew and remove the three rear screws for the timing cover
screw connection.
RA Adjustment specification for camshaft (M50 VANOS)
BMW AG - TIS
20.01.2013 19:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -