5 Series E34 525i (M50) SAL
11 23 031
Replacing hub for vibration damper (M50 /
M52 / S52 / M52TU)
Special tools required:
•
11 2 150
•
11 2 410
Remove vibration damper.
Note:
Remember to fit dowel pin.
Secure special tool 11 2 150 with special tool 11 2 410
(shim) to hub for vibration damper.
When releasing and tightening down central bolt, grip special
tool 11 2 150 with assistance of a second person.
If it is not possible to grip the tool securely: Remove mounted
parts until the special tool 11 2 150 can be supported on the
engine carrier without damaging other components.
Caution!
Protect engine bracket from damage.
Insert wood between engine carrier and special tool 11 2 150 .
Unscrew central bolt. Detach hub for vibration damper.
Replace radial seal in lower timing case cover.
RA Replacing hub for vibration damper (M50 / M52 / S52 / M52TU)
BMW AG - TIS
20.01.2013 19:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
