5 Series E34 525i (M50) SAL
Unscrew studs.
Prepare special tool 11 3 260.
Fit special tool 11 3 260 to cylinder head and screw into spark
plug threads in cylinders 1 and 4.
Tightening Torque,
refer to Technical Data 12 12 1AZ
Caution!
Bearing cover 1 on intake camshaft is centered on hollow
dowels.
To prevent the intake camshaft from tilting in the bearing strip,
remove bearing cover 1.
RA Replacing camshaft (M50 VANOS)
BMW AG - TIS
20.01.2013 19:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
