5 Series E34 525i (M50) SAL
Installation:
Installation of VANOS adjustment unit is described separately
from removal. Assembly sequence differs between removal and
installation.
Version with plate spring
Rotate sprockets and secondary chain clockwise with special
tool 11 5 490 until detent position is reached.
Version without plate spring
Note:
On version without plate spring, special tool is not required.
Turn sprockets with mounted secondary chain clockwise as far as
stop.
Press back spline shaft on adjustment unit (1) as far as detent in
housing (2).
RA Removing and installing or replacing VANOS adjustment unit (M50)
BMW AG - TIS
20.01.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -