5 Series E34 525i (M50) SAL
Install arrester bolt (1) and spring (2).
Note:
Roller (3) must be positioned horizontally.
Install shear-off screw (1) with Loctite 243 locking varnish and
tighten down.
Install the reverse gear switch.
Tightening torque,
refer to Technical Data 61 31 3AZ.
Knock in plug (3).
Installing clutch release mechanism and release lever,
refer to 21 51 500.
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
20.01.2013 19:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -