5 Series E34 525i (M50) SAL
Unscrew bolts, disconnect plug-in connection and lift out
compressor in downwards direction.
Installation:
Drain remaining cold oil from old compressor and pour into a
measuring container. Also pour extracted refrigerant from
service station into the measuring container and note the total
quantity of oil.
Refrigerant from air-conditioning system and old compressor
cannot be re-used: dispose of this fluid in the correct way.
Clean measuring container.
Drain all refrigerant from new compressor into a suitable container
and refill compressor with correct quantity of refrigerant as
calculated beforehand.
Note:
Remaining refrigerant can be poured into service station tank.
Refrigerant must be disposed of in the correct way.Do not
store refrigerator oil in open containers because it is a very
hygroscopic fluid.
RA Replacing air conditioning compressor (M50, M52)
BMW AG - TIS
20.01.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
