5 Series E34 525i (M50) TOUR
Removing thermostat housing (M50)
Note:
This job is necessary to ensure that cylinder head can be
fitted to special tool 11 1 065 (assembly fixture).
Unscrew suspension eye.
Unscrew thermostat housing.
Installation:
Replace seal.
Installation:
Check installed direction.
Vent hoe or arrow faces up.
Replace O-ring.
RA Removing thermostat housing (M50)
BMW AG - TIS
21.01.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
