5 Series E34 525ix (M50) SAL
Bearing-cap tightening procedures:
1st step: tighten bolts to tightening torque in Nm,
refer to Technical Data
2nd step: Tightening screws with special tool 11 2 110 and/or
special tool 00 9 120 with torsion angle,
refer to Technical Data
For tightening torque, refer to Technical Data
RA Removing crankshaft (M50 VANOS)
BMW AG - TIS
21.01.2013 20:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -