5 Series E34 525ix (M50) SAL
Version with plate spring
Slide VANOS adjustment unit towards cylinder head.
Guiding the helical bevel splined shaft into the helical bevel
splined sprocket turns the sprockets with mounted chain
counterclockwise.
Rotate chain and gears with special tool 11 5 490 counter-
clockwise.
Version without plate spring
Rotate chain and gears by hand counter-enginewise until spline
shaft locates in internal spline of sprocket (2).
Caution!
Always ensure that the FIRST suitable tooth engages.
Version without plate spring
Slide VANOS adjustment unit towards cylinder head.
Guiding the helical bevel splined shaft into the helical bevel
splined sprocket turns the sprockets with mounted chain
counterclockwise.
Guide the chain with sprockets in counterclockwise direction by
hand.
RA Removing and installing or replacing VANOS adjustment unit (M50)
BMW AG - TIS
21.01.2013 20:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
